Repair Kit (Fuel Valve)

SKU

FSO-KT-7

Skip to the beginning of the images gallery

Product images are for illustrative purposes only and may differ in appearance from the actual item delivered.

Product Description

Contains all of the hardware required to reseal and perform a basic repair of the 9851096-2 and 9851096-5 Cessna fuel selector valves.

3 each Screws
1 each Washer, rotor bearing
1 each Ball, detent
3 each Springs
2 each Seals, rotor wiper
2 each Washers, rotor wiper
1 each Valve, drain
1 each FSS-KT-4 seal kit

All fuel valves require special processes to ensure a properly sealed valve after an repair. McFarlane has perfected these processes through extensive experience repairing fuel valves. All valves also require pressure test equipment to verify that the valves do not leak in any position before reinstalling in the aircraft. McFarlane is set up to efficiently and effectively do all of this. Repaired fuel valves are cleaned, inspected and assembled with all new seals, gaskets, hardware and parts as required. Each valve is repaired by our experienced A&P technicians and pressure tested for leaks and evaluated for proper fuel flow. You will receive a "Return to Service" tag to certify the repair.

If we have a core in stock, you can purchase an repaired valve for a price that includes a core charge, and then send us your core back for a partial refund. Alternatively, you can send us your valve and we will repair it and send you back the same valve. Note: To qualify for a core charge refund, the major components of the core you return must be in a serviceable condition. For more information, go to Repaired Fuel Selector Valves.

Maintenance Tip:
The fuel selector valve works in unscreened fuel. Contaminated fuel can cause selector valve seal damage. When fueling from possibly contaminated fuel sources McFarlane recommends the use of a fuel filter, such as Mr. Funnel or another filtering device, to reduce trash in the fuel system.